Research Article

Distal femur morphology and the suitability of standard guides for knee arthroplasty in the Turkish population

Volume 58 · Issue 1 · January 2024 Publish Date: February 28, 2024
Full Text PDF
DOI
Mustafa Alper İncesoy
Department of Orthopaedics and Traumatology, Bezmialem Vakıf University, Istanbul, Turkey
Nurdan Güngören
Department of Orthopaedics and Traumatology, Universitätsklinikum Tübingen, Tübingen, Germany
Orkhan Aliyev
Department of Orthopaedics and Traumatology, Rotkreuzklinik Wertheim, Wertheim, Germany
Nurzat Elmalı
Department of Orthopaedics and Traumatology, Bezmialem Vakıf University, Istanbul, Turkey
İbrahim Tuncay
Department of Orthopaedics and Traumatology, Bezmialem Vakıf University, Istanbul, Turkey
Fatih Yıldız
Department of Orthopaedics and Traumatology, Bezmialem Vakıf University, Istanbul, Turkey
İncesoy, M. A., Güngören, N., Aliyev, O., Elmalı, N., Tuncay, İbrahim, & Yıldız, F. (2024). Distal femur morphology and the suitability of standard guides for knee arthroplasty in the Turkish population. Acta Orthopaedica Et Traumatologica Turcica, 58(1), 39–44. https://doi.org/10.5152/j.aott.2024.21066
Full Text Full Text PDF

Abstract

Objective: The aim of this study was to evaluate the posterior condylar angle (PCA) and condylar twist angle (CTA) of the distal femur in the Turkish population and its concordance with the current standard prosthesis guides used in total knee arthroplasty (TKA).

Methods: Two hundred and forty knees of 120 Turkish subjects (60 male and 60 female) were included in this study. PCA, CTA, femoral mediolateral lengths (fML), medial femoral anteroposterior lengths (fMAP), lateral femoral anteroposterior lengths (fLAP), distances between the trochlear groove and fMAP (DBTG–fMAP), distances between the trochlear groove and fLAP (DBTG–fLAP), medial posterior condylar cartilage thickness (MPCCT) and lateral posterior condylar cartilage thicknesses (LPCCT) were measured on magnetic resonance imaging (MRI).

Results: The median CTA was 7° (range: 0°-13.0°) and the median PCA was 4° (range 0°-11.0°) (P < .0001). The median fML was 79.5 mm (range: 65.7-98.9). The median length of the fMAP was 58.2 mm (range: 46.8-69.0) and the median length of fLAP was 58.2 mm (range: 48.4-73.0). The DBTG–fMAP was 15.2 mm (range: 5.2-23.2), and DBTG–fLAP length was 21.9mm (range: 16.4-29.4). The median MPCCT and LPCCT were 2.4 mm (range: 1.6-3.6) and 2.3 mm (range: 1.2-2.8), respectively. The intraclass correlation coefficient for quantifying interobserver and intraobserver reliability showed excellent agreement regarding the PCA and CTA.

Conclusion: This study has shown us that PCA and CTA may be higher in the Turkish population. Although it is not known whether these results have any clinical utility, it may be useful for surgeons to keep this in mind to prevent femoral component malposition.

Level of Evidence: Level IV, Diagnostic Study.

Cite this article as: İncesoy MA, Güngören N, Aliyev O, Elmalı N, Tuncay İ, Yıldız F. Distal femur morphology and the suitability of standard guides for knee arthroplasty in the Turkish population. Acta Orthop Traumatol Turc., 2024;58(1):39-44.

Similar Articles

Article Info
Published In
Journal Acta Orthopaedica et Traumatologica Turcica
Volume / Issue Volume 58 · Issue 1 · January 2024
Pages 39-44
History
Published Online February 28, 2024
Copyright
Affiliations
1
Mustafa Alper İncesoy
Department of Orthopaedics and Traumatology, Bezmialem Vakıf University, Istanbul, Turkey
2
Nurdan Güngören
Department of Orthopaedics and Traumatology, Universitätsklinikum Tübingen, Tübingen, Germany
3
Orkhan Aliyev
Department of Orthopaedics and Traumatology, Rotkreuzklinik Wertheim, Wertheim, Germany
4
Nurzat Elmalı
Department of Orthopaedics and Traumatology, Bezmialem Vakıf University, Istanbul, Turkey
5
İbrahim Tuncay
Department of Orthopaedics and Traumatology, Bezmialem Vakıf University, Istanbul, Turkey
6
Fatih Yıldız
Department of Orthopaedics and Traumatology, Bezmialem Vakıf University, Istanbul, Turkey
Cite this Article
İncesoy, M. A., Güngören, N., Aliyev, O., Elmalı, N., Tuncay, İbrahim, & Yıldız, F. (2024). Distal femur morphology and the suitability of standard guides for knee arthroplasty in the Turkish population. Acta Orthopaedica Et Traumatologica Turcica, 58(1), 39–44. https://doi.org/10.5152/j.aott.2024.21066
Outlines