Research Article

In silico assessment of talus osteochondral lesion size and location on biomechanical load distribution using tilted talar dome planes

Volume 59 · Issue 6 · December 2025 Publish Date: December 31, 2025
Full Text PDF
DOI
Similar Articles
Lercan Aslan ORCID
Department of Orthopaedics and Traumatology, Koç University School of Medicine, İstanbul, Türkiye
Omer Subasi ORCID
Foot & Ankle Research and Innovation Laboratory, Department of Orthopaedic Surgery, Massachusetts General Hospital, Harvard Medical School, Boston, USA
Bedri Karaismailoglu ORCID
Foot & Ankle Research and Innovation Laboratory, Department of Orthopaedic Surgery, Massachusetts General Hospital, Harvard Medical School, Boston, USA
Cemil Cihad Gedik ORCID
Department of Orthopaedics and Traumatology, Koç University School of Medicine, İstanbul, Türkiye
Batuhan Yuruk ORCID
Department of Orthopaedics and Traumatology, Koç University School of Medicine, İstanbul, Türkiye
Soheil-Ashkani Esfahani ORCID
Foot & Ankle Research and Innovation Laboratory, Department of Orthopaedic Surgery, Massachusetts General Hospital, Harvard Medical School, Boston, USA
Ilker Eren ORCID
Department of Orthopaedics and Traumatology, Koç University School of Medicine, İstanbul, Türkiye
Aslan, L., Subasi, O., Karaismailoglu, B., Gedik, C. C., Yuruk, B., Esfahani, S.-A., & Eren, I. (2025). In silico assessment of talus osteochondral lesion size and location on biomechanical load distribution using tilted talar dome planes. Acta Orthopaedica Et Traumatologica Turcica, 59(6), 361–367. https://doi.org/10.5152/j.aott.2025.25444
Full Text FULL TEXT PDF

Abstract

Objective: This study aimed to computationally evaluate the effects of lesions of varying sizes and locations on stress distribution and ankle stiffness across the nine-zone grid of the talar dome in three different ankle positions.

Methods: An adult ankle geometry was modeled with 1 mm of cartilage on both sides of the tibiotalar contact. Lesions with diameters of 4.5, 6.4, and 9 mm were created on the talar dome at each grid partition, ranging from section 1 (anteromedial) to 9 (posterolateral). The key innovation of the study was the use of tilted talar planes to account for the dome’s curvature, enabling more accurate lesion model ing and biomechanical analysis. Percent changes in osteochondral von Mises stress distribution and ankle stiffness parameters were investigated using finite element analysis. Based on the designated design parameters, 81 different cases were modeled and simulated.

Results: Zones 7 (posteromedial, −33.2% change in stiffness for a 9 mm defect), 3 (anterolateral, −24.2% change in stiffness for a 9 mm defect), and 8 (mid-posterior, −48.8% change in stiffness for a 9 mm defect) were found to be the most critical zones, showing evidence of decreased ankle stiffness in neutral, dorsiflexion, and plantarflexion positions, respectively. Zone 9 (posterolateral; neutral −4.7%, dorsi flexion 5.4%, plantarflexion 0.17% stiffness change for a 9 mm defect) was found to be the least critical zone in terms of biomechanical stiffness.

Conclusion: From a clinical standpoint, since lesions in zones 8, 7, and 3 significantly impact joint biomechanics compared to other zones, more aggressive cartilage restoration or augmentation could be required while lesions in less problematic zones like zone 9 can be treated withmicrofracture surgery.

 

Cite this article as: Aslan L, Subasi O, Karaismailoglu B, et al. In silico assessment of talus osteochondral lesion size and location on biomechanical load distribution using tilted talar dome planes. Acta Orthop Traumatol Turc., 2025;59(6):361-367.

Similar Articles

Similar Articles

Article Info
Published In
Journal Acta Orthopaedica et Traumatologica Turcica
Volume / Issue Volume 59 · Issue 6 · December 2025
Pages 361-367
History
Published Online December 31, 2025
Affiliations
1
Lercan Aslan ORCID
Department of Orthopaedics and Traumatology, Koç University School of Medicine, İstanbul, Türkiye
2
Omer Subasi ORCID
Foot & Ankle Research and Innovation Laboratory, Department of Orthopaedic Surgery, Massachusetts General Hospital, Harvard Medical School, Boston, USA
3
Bedri Karaismailoglu ORCID
Foot & Ankle Research and Innovation Laboratory, Department of Orthopaedic Surgery, Massachusetts General Hospital, Harvard Medical School, Boston, USA
4
Cemil Cihad Gedik ORCID
Department of Orthopaedics and Traumatology, Koç University School of Medicine, İstanbul, Türkiye
5
Batuhan Yuruk ORCID
Department of Orthopaedics and Traumatology, Koç University School of Medicine, İstanbul, Türkiye
6
Soheil-Ashkani Esfahani ORCID
Foot & Ankle Research and Innovation Laboratory, Department of Orthopaedic Surgery, Massachusetts General Hospital, Harvard Medical School, Boston, USA
7
Ilker Eren ORCID
Department of Orthopaedics and Traumatology, Koç University School of Medicine, İstanbul, Türkiye
Cite this Article
Aslan, L., Subasi, O., Karaismailoglu, B., Gedik, C. C., Yuruk, B., Esfahani, S.-A., & Eren, I. (2025). In silico assessment of talus osteochondral lesion size and location on biomechanical load distribution using tilted talar dome planes. Acta Orthopaedica Et Traumatologica Turcica, 59(6), 361–367. https://doi.org/10.5152/j.aott.2025.25444
Outlines